投稿

超高画質解像度(UHD)のOLEDスマートフォン時代の幕は開くのか

最近スマートフォン機器によるVRコンテンツ体験が増える傾向にあり、高解像度スマートフォンが求められているが、2014年に初めてGalaxy Note4にQHD OLEDが採用されて以来3年間、OLEDスマートフォンの解像度は変わらずQHD程度に留まっている。
OLEDスマートフォンの解像度を決定する鍵は、発光層の蒸着工程である。現在、採用されている上向式蒸着方式は、基板とFMM(Fine Metal Mask)を水平にして蒸着装置の上部に配置した後、下部のリニア蒸発源に有機物を蒸発させてRGB発光層を形成する方式である。

 

UHD以上の高解像度OLEDを製造するためには、厚さ15um以下の薄いFMMが必要となるが、FMMが薄くなるほどパターニング、引張、溶接などの技術的な問題が生じ、量産に採用することは容易ではい。

 

このような問題を改善するために、垂直型蒸着、面蒸発源蒸着、様々なメタルマスクパターニング(Metal Mask Patterning)技術が開発されている。

 

基板とFMMを垂直に配置する垂直型蒸着装置は日本の日立が初めて開発し、キヤノントッキもFinetech Japan 2013で、第6世代垂直蒸着方式の装置を公開したことがあるが、現在量産には採用されていない。

<Finetech Japan 2013で公開したキヤノントッキの第6世代垂直型蒸着装置>

しかし、最近の電子新聞によると、米国Applied Materialsが第6世代フレキシブルOLED用垂直蒸着方式の蒸着装置を開発したことを明らかにし、日本のジャパンディスプレイでテストしている。

 

リニア蒸発源ではなく、面蒸発源を用いた蒸着方式も検討されている。面蒸発源蒸着方式は、まず有機物を金属面に蒸着した上で面蒸発源を製造し、それを再蒸発させて基板に有機物薄膜を形成する原理である。iMiD 2017でOLEDONのファン・チャンフン代表は、面蒸発源蒸着方式を採用することで、2250ppi高解像度のOLEDを実現できると述べた。

 

Metal Mask Patterning技術としては、主に電気鋳造 (Electro Forming)とレーザーパターニング技術が挙げられている。電気鋳造方式は韓国のWave ElectronicsとTGO Technology、日本のアテネなどのメーカーが開発中で、レーザーパターニング技術は韓国AP Systemsが開発している。

 

このように様々な観点から高解像度OLEDを実現するための開発が、現在の問題を改善し、OLEDスマートフォンのUHD解像度の実現に貢献できるかという点に大きな注目が集まっている。

<OLEDONが開発した面蒸発源蒸着技術の原理>

OLED蒸着装置市場でキヤノントッキを代替可能な候補は?

OLEDを採用したスマートフォンが増えている。米国Appleは2017年下半期にOLEDを採用したiPhoneを発売する予定で、韓国Samsung Electronicsは全てのスマートフォンにOLEDを採用すると見込まれている。中国の電機メーカーもハイエンドスマートフォンにOLEDを採用しており、韓国Samsung Displayの中国向けOLED生産量も増加している様子だ。

 

スマートフォン向けOLEDに対する需要が高まり、Samsung Display、韓国LG Display、ジャパンディスプレイ、中国BOE、中国CSOTなど、主要ディスプレイメーカーは第6世代規模のフレキシブルAMOLED量産ラインへ投資を進めるなど計画している。

 

2017年から2018年の2年間、パネルメーカーの投資が予想される第6世代フレキシブルAMOLED量産ラインの規模は、15,000個を基準に約20個のラインで、OLED量産ライン稼働に必須である蒸着装置を確保することが重要な課題となっている。

 

現在、韓国でフレキシブルAMOLEDを量産しているSamsung DisplayとLG Displayは、キヤノントッキが製造した蒸着装置を導入して量産を行っている。韓国SFAと韓国SNU、アルバックも中国パネルメーカーに量産用の蒸着装置を納品しているが、第4世代から第5世代向けの装置である。2016年、韓国Sunic SystemはLG Displayに第6世代用蒸着装置を納品したものの、まだ量産にはつながっていない。即ち、第6世代用蒸着装置の量産を実現したメーカーはキヤノントッキのみとなっている。。

 

パネルメーカーはキヤノントッキ製蒸着装置の購入を希望しているが、、残念ながらキヤノントッキは蒸着装置製造ラインはフルキャパで、全てのパネルメーカーからのラブコールに対応できない状況だ。そのような中で、SFAはSUNを買収し、装着装置に対する競争力を備え、中国GVOと中国Royalから第5.5世代の量産ライン用蒸着装置を受注することに成功した。Sunic Systemも2016年下半期に第6世代用蒸着装置を追加受注し、米国Applied Materialsも同装置をパネルメーカーに納品するよう開発に取り組んでいる。

 

このようにキヤノントッキが絶対的な存在感を持っている蒸着装置市場では、一歩出遅れた後発蒸着装置メーカーの挑戦が相次いでいる。キヤノントッキも徐々に蒸着装置量産の生産能力を拡大していくと見られている中、後発蒸着装置メーカーが製造した蒸着装置の導入が第6世代フレキシブルAMOLEDの量産成功につながるかどうかによって今後の蒸着装置市場が大きく影響を受けると見込まれる。

<OLED量産(予定)パネルメーカー(左)とOLED蒸着装置メーカー(右)>

Looking Ahead to 2016 OLED Industry through Keywords

  1. Flexible AMOLED Investment

In 2016, flexible AMOLED mass production line investment is expected to be actively carried out by Samsung Display, LG Display, BOE, and Japan Display. For Samsung Display to apply flexible AMOLED panel to the new Galaxy model, the mass production line investment is necessary. If they supply flexible AMOLED panel to Apple, volume of the flexible AMOLED mass production to be invested in 2016 is estimated to be grow significantly. LG Display also is expected to actively carry out flexible AMOLED line manufacturing equipment order for Gumi’s P6 line, as well as additional flexible AMOLED mass production line investment following Apple’s demand. BOE is estimated to seriously begin orders for Chengdu’s Gen6 45K flexible AMOLED mass production line.

 

  1. P10

With the announcement of new factory establishment and 1.84 billion KRW investment for part of facilities in Q4 2015, as the first step of the investment, LG Display began site construction for P10 line factory that can produce large area panel. However, the investment direction has not yet been decided. P10 could be directed to only producing large area LCD panel, large area OLED panel, small-to-medium size OLED panel, or large area and small-to-medium size OLED panel simultaneously. China’s Gen8 LCD facilities investment is quite advanced and BOE’s Gen10.5 LCD line investment has also been confirmed. As such how much LG Display’s large area LCD can bring profit has to be carefully considered. Additionally, with the increase of OLED TV consumption and the supply of OLED panel to Apple practically confirmed, OLED investment is essential. P10, Gen11 line, is the world’s largest factory site, and depending on the investment direction in 2016, it is estimated to affect OLED market’s opening time.

 

  1. Chinese OLED

Everdisplay is supplying AMOLED panel to some several Chinese set companies, and Visionox is also expected to actively supply AMOLED panel from 2016. As such, most of Chinese OLED panel companies’ OLED mass production preparation is anticipated to conclude in 2016. Accordingly, second investment by companies including Everdisplay, Visionox, and Tianma is analyzed to be possible and serious movement by China’s OLED industry could occur.

 

  1. Evaporation Equipment

Flexible AMOLED mass production line investment by Samsung Display, LG Display, Japan Display, and BOE, and other Chinese OLED panel companies’ additional installation are expected to be actively carried out from 2016. Amidst this, order of evaporation equipment, OLED production’s essential component, is expected to be an issue.

 

Evaporation equipment currently being used in mass production is mostly Japanese Canon Tokki’s. As this evaporation equipment has been verified in mass production, it is estimated that most companies, including Samsung Display, LG Display, BOE, and JDI, will want to order Canon Tokki’s evaporation equipment. However, as the production capa. of Canon Tokki’s evaporation equipment is limited, the issue is expected to be which panel company will be able to order early. At the same time, this could be a new opportunity for Korean evaporation equipment companies.

 

  1. Samsung OLED TV

At present, the TV industry trend is moving to OLED from LCD. Accordingly, Samsung Display is continuing research to resume their large area OLED for TV panel business. It is analyzed that Samsung Display possesses RGB OLED technology that uses SMS evaporation method, white OLED, and solution process OLED technology. However, as each technology has its drawbacks, they are carefully considering future directions. First, RGB OLED technology is estimated to lack Gen8 mother glass substrate evaporation equipment at present. Solution process OLED method has low material performance. For white OLED, as the key patents are owned by LG Display, technology that avoids these has to be first developed. Therefore, much attention is focused on which technology Samsung Display will use and invest in production line to enter the TV market.